리눅스와 윈도우 듀얼부팅에서 윈도우만 새로 깔아야할상황이 왔습니다.

윈도우8.1에서 디아3이 실행이 안대서.. ㅠ_- 윈도우7으로 다시 돌아가려하니 리눅스도 다시깔아버릴가하다가..

그동안 셋팅해놓은게 아깝고 업데이트하기도 귀찮아서  Grub을 다시깔아서 복구하기로 했습니다.


사용중인 리눅스는 LinuxMint17 입니다.

우분투 파생리눅스인만큼 우분투도 가능하리라 봅니다.


1. 우선 윈도우를 다시 설치하고 

2. 리눅스 라이브 CD나 USB로 부팅후 터미널을 열어줍니다.

3.  아래대로 명령어 입력  ㄱ ㄱ 해줍니다.

맨아래줄 grub 까지 설치해주시고 재부팅하시면 됩니다.


jabcho@jabcho-R200-EP93K ~ $ sudo -i            #슈퍼유저로 들어갑니다.

[sudo] password for jabcho:
jabcho-R200-EP93K ~ # fdisk -l                              #하드디스크 정보를 확인합니다. -엘 입니다.


Disk /dev/sda: 250.1 GB, 250059350016 bytes          #첫번째 하드디스크정보입니다.
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000988ff

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      718847      358400    7  HPFS/NTFS/exFAT
/dev/sda2          718848    97136147    48208650    7  HPFS/NTFS/exFAT
/dev/sda3        97136638   300281855   101572609    5  Extended
/dev/sda4       300281856   488396799    94057472    7  HPFS/NTFS/exFAT
/dev/sda5        97136640   104968191     3915776   82  Linux swap / Solaris
/dev/sda6       104970240   300281855    97655808   83  Linux                  #sda6 파티션이 리눅스공간이라는걸 알아냈습니다.

jabcho-R200-EP93K ~ # 


jabcho-R200-EP93K ~ # mkdir /media/root                         #마운트할폴더를 만들어줍니다.
jabcho-R200-EP93K ~ # mount /dev/sda6 /media/root     #리눅스파티션을 마운트합니다.

jabcho-R200-EP93K ~ # grub-install --root-directory=/media/root /dev/sda     #grub을 인스톨해줍니다.






리눅스를 사용해서 프로그래밍을 하고, 영화를 보고,.. 음악도듣고...그럭저럭 만족할만하긴 합니다.
그런데 게임을 하려니.. 다시 멀티부팅을 이용해서 윈도우로 들어갔다가, 다시 부팅해서 리눅스로 왔다가.. 여간 짜증나는일이 아닐수 없습니다. 리눅스가 상당부분 발전해왔듯이 여러분야에서 골고루 발전했다면.. 참~~ 좋았겠지만. 이상하게도 게임분야가 참... 발전이 없다고 느끼는건.. 윈도우기반의 온라인게임들이 어마어마하게 많은반면 리눅스용은 그에비해 턱없이 적은데서 배고픔을 느낍니다.ㅠ_- 게임을 끊었지만;; 어느순간 급생각나기도하고 @_+vmware나 virtualbox에서 게임을 하자니 뚝뚝끊겨서 더 열받고..예전에 wine을 사용해 게임을 할때 버그때문에 실행이 안된다던가. 되다가 이유없이 꺼져버린다던가 그런이유로 사용을 안했습니다만. 시간이 많이 흐른이상. 더 많이 발전되지 않았을까 생각이 나서 설치후리뷰를 해봅니다.

리눅스 데스크탑에서 윈도위 게임을 구동할수있는 에뮬레이트 3가지 방법은 다음과같습니다.






1. wine
와인은 유닉스와같은 운영체제에서 다양한 종류의 Windows응용 프로그램을 샐행할수 있는 무료 오픈 소스 소프트웨어입니다. 
에뮬레이터의 목적과는 다르게 에뮬레션이 안되는? 경우가 많았었고, 많은 유저들과 개발자들의 실수들로인해,  소프트웨어 커뮤니티가 상당히 활성화되있습니다.ㅋㅋ
 
와인을 사용하면, 윈도우에서의 사용과 비슷하게 최신 3D게임들을 포함해서 모든 종류의 게임을 완벽하게 실행할수 있습니다.
(Gild Wars, Fallout 3.x, Left 4 Dead, Wow 등등..)

게임과 별개로 Windows플렛폼에서 사용할수 있는 다양한 프로그램들을 실행할수있습니다. 
포토샵이나 iTunes와 Steam등 인기인는 소프트웨어를 설치할수있습니다.


와인은 1993년부터 리눅스와 같이 많은 인기를 끌고있는 하나의 프로젝트로, 150만명이사용하고있습니다.
많은 결점이 있기에 개발자들로 하여금 하나씩 하나씩 고쳐지고 있습니다. 
wine의설치는 소프트웨어 관리자 또는 시넵틱 패키지 관리자에서 wine검색후 설치할수있습니다.
와인 DB





2. Playonlinux
Playonlinux는 리눅스에서 Windows기반의 게임 및 어플리케이션의 단순한설치를 목표로한 Wine 의 그래픽 Front-end 입니다. Playonlinux는 Windows응용 프로그램 대부분의 데이터베이스를 포함하고있고, 특정 소프트웨어를 검색하는 경우 와인버젼에 가장적합한 응용프로그램에 필요한 소프트웨어를 설치합니다. 데이터베이스는 지속적으로 업데이트 하고 그중에 Potal2와같은 최신 게임을 포함하고있습니다.
게임을 위한 프로젝트이지만 리눅스 사용자를 위한 IE6(인터넷익플로어6), 파이어 폭스, iTunes 등  windows 응용프로그램을 설치하는데 도움이 되고,
리눅스 외에도 Mac용으로도(PlayonMac) 있습니다.
설치는 소프트웨어 메니져에서 설치하거나
다운로드 페이지 에서 하당파일을 선택하고 설치하면 됩니다.




3. Crossover Games
크로스 오버 게임은 리눅스와 맥 사용자가 Windows기반 응용프로그램을 사용해서 혼합소스(mixed-source) 어플리케이션을 설치할수있게하는 크로스 오버 제품군의 일부입니다.
Codeweavers 에서 기존 wine의 수정해 독자적으로 개발한 제품입니다.
wine에 대한 사용자 친화적은 프런트 엔드 역할에서, 크로스 오버 게임은 윈도우에서 넘어온 사람들을위해 다양한 피치와 친숙한 구성 도구를 포함하고 있습니다.
Counter Strike, Half-Life2, World of Warcraft, Call of Duty 2, Gild Wars등 더 많은 게임을 지원하기 위해 노력하고있습니다. 또한 소프트웨어에 대한 전문적인 지원을 제공하고있습니다.

설치는 우분투 소프트웨어 센터 에서 평가판 버젼을 받아서 설치하고, 원하는 응용프로그램을 설치한후 온라인에서 구입하는 방식입니다. 공식웹사이트 . $40 ㅡ.,ㅡ;;

즐겜하세욤 wine에서 구동되는장면 몇가지 첨부합니다.





콜 오브 듀티 4


에버퀘스트 - 망한게임


길드워 국내에선 망한겜, 외국에서흥한겜.


하프 라이프2


NBA 라이브 07- 무적160cm 슬램덩크하는맛에 했던 농구겜 ㅋ


스타크래프트1. 스타2역시 구동가능


워크래프트3 흐 


World of Warcraft 유명한 와우



 
windows를 주로 사용하던 시절에도, 현제 리눅스 fedora15. linuxmint11. ubuntu 11.10을 번갈아가며 사용하고있는상황에서도, 항상 주요관심사에서 빠지지 않았던것이 웹브라우저의 선택이었습니다. 한국에서 인터넷익스플로어를 어거지로 사용할수밖에없었던 이유는 다들 아시다 싶이 ActiveX 때문인것은 누구도부정할수 없을것입니다. 금융거래시 보안때문에 ActiveX를 사용하게끔만드는 법에도 문제가 많은건 우리 대한민국밖에 없다는것.(짜증나죠.;) 가장 개선되어야할것중 한가지 일뿐입니다. 

이런저런 이유로 (속도, 외형, 부가기능 등) 각자 취향에 맞는 웹브라우저를 찾고계신분들을 위해 리눅스용으로 어울리는 웹브라우져 상위5가지를 살펴보겠습니다.

주관적인 best5 이므로 선택과 사용은 여러분이 직접 결정하시면 되겠습니다.





best 1. Chrome, Chromium, Chromeplus, RFWare iron


Google 크롬은 Chromium이라는이름으로 리눅스에서 더 많이 사용하고있습니다. 약 2년사이에 크롬은 리눅스에서 뿐만아니라 여러 windows에서도 이용자들이 빠르게 늘고있습니다. 빠른속도와 여러가지 플러그인 어플리케이션 등 지금도 빠른개발이 진행중입니다. 역시 오픈소스로인해 크롬, 크로뮴, 크롬플러스, RFWare iron 등 여러가지의 이름으로 개발되고있다는점또한 주목할만합니다. Fire fox말고 다른웹브라우져를 찾는분들에게 권해줄만 웹브라우져 중 한가지입니다.

설치또한 리눅스에서는 포터블 형식, 다운로드후 압축을 풀기만해도 사용가능하다는점 또한 맘에 듭니다.

현제 데비안, 우분투, 페도라 및 OpenSuse 용을 공식 패키지로 제공합니다.
다른 리눅스 사용자라하여도 걱정할것이 없습니다. 현제 다양한 배포판용으로 개발중이니까요..

구글의 개인정보침해 라는 내용으로 인터넷 기사를 보신분들이 있을듯합니다. 구글검색시 검색단어와 나의ip주소를 구글서버로 자동저장 하게끔 한다는것인데요. 개인정보보호에 민감하신분들에게는 권하고싶지 않은 브라이져이기도 합니다.
저또한 회사에서의 사용은 회사의 정보, 위치 보호를 위해 사용하지 않고있습니다.
그로인해 생긴것이 RFware라는 브라우져입니다. 구글크롬 소스에서 개인정보 자동전송을 해결한 웹브라우져입니다. 
리눅스에서 크롬은 이미 파이어폭스의 사용자보다 많아진지 얼마 되지 않았지만, 빠르게 늘고 있습니다...
익숙해지면 빠져나오기 힘들기때문이겠죠 ㅎ

http://www.google.com/chrome 
http://code.google.com/p/chromium/
http://chromeplus.org/
http://www.srware.net/en/software_srware_iron_download.php

 특징
  • 북마크
  • 응용 프로그램 바로가기
  • 탭 브라우징
  • 확대 페이지
  • 팝업 차단
  • 다운로드 관리자
  • 비밀 번호 관리자
  • 양식 자동 완성
  • 증분 찾기
  • 맞춤법 검사기
  • 검색 엔진 모음
  • 전체 텍스트 검색 기록
  • 이러한 어도비 플래시와 애플 퀵타임 같은 NPAPI 스타일 "플러그인"에 대한 지원
  • 테마
  • 시크릿 개인 정보 보호 브라우징 모드
  • 보안 구성
  • 공간 이동
  • 키보드와 마우스 단축키
  • 가져오기 브라우저 설정
  • 액세스 키
System Requirements
To compile:
Python >= 2.4
Perl >= 5.x
gcc/g++ >= 4.2
g++-multilib >=4.2
bison >= 2.3
flex >= 2.5.34
gperf >= 3.0.3
pkg-config >= 0.20
libnss3-dev >= 3.12
libasound2-dev
libgconf2-dev
libglib2.0-dev
libgtk2.0-dev
libnspr4-0d >= 4.7.1+1.9-0ubuntu0.8.04.5
libnspr4-dev >= 4.7.1+1.9-0ubuntu0.8.04.5
msttcorefonts (Microsoft fonts)
freetype-dev
libcairo2-dev
libdbus-1-dev
 
 


best 2. Fire fox


파이어 폭스는 모질라 코퍼레이션에서 개발한 크로스 플랫폼 오픈 소스 브라우저 입니다.
리눅스 사용자 대부분이 GUI 환경의웹브라우져로 사용하고 있습니다. 전체 인터넷 사용자의 22~23%(인터넷익스플로어다음으로 두번째로 많은)가 사용하고 있습니다. 리눅스 뿐아니라 windows와 맥os 에서도 많이 사용하고있습니다.
최근 버젼은 5.0으로 4.0 때보다 체감속도가 좀더 빨라졌습니다. 많은 플로그인으로 어떤걸 골라사용할지 고만하게 만들기도합니다. 여러 메이저 배포판에 기본을 설치가 되어있듯이 안정성은 믿을만하다는거겠죠~ 여러개의 사이트를 둘려볼때 메모리 사용량또한  만족할만합니다.  best 2 으로 손색이 없을듯합니다.
파이어 폭스틑 HTML, XML, XHTML, CSS, ECMAScript( 자바 스크립트), DOM, MathML, DTD, XSLT, XPath, 투명PNG이미지를 포함한 많은 소프트웨어 표준을 지원합니다.
http://www.mozilla.or.kr
  • 화면 웹사이트가 귀하의 개인 데이터와 팝업 차단에 대한 스파이웨어 또는 "피싱"을 다운로드 고급 보안 기능
  • 여러 웹 페이지가 동일한 브라우저 창에서 열 수 있도록 탭 브라우징
  • 맞춤법 검사기
  • 라이브 북마크는 북마크 도구 모음 또는 메뉴에서 해당 뉴스 또는 블로그 헤드 라인과 같은 웹 피드를 볼 수 있습니다
  • 클릭 한 번으로 즐겨찾기
  • 증분 찾을
  • 통합 다운로드 관리자
  • 제안 목록 (구글, 야후와 Answers.com을위한 작품) 드롭 다운과 함께 검색 시스템
  • 파이어 폭스가 마지막으로 폐쇄되었을 때 당신은 위치로 돌아갈 수 있도록 세션 복원 내장
  • 사용자가 마우스 클릭으로 인기있는 RSS 리더에 RSS 피드를 추가할 수 있도록 웹 피드 (RSS) 통합
  • DHTML 접근에 대한 지원
  • 인스턴트 웹 사이트 ID
  • 자동 업데이트
  • 안티 피싱 및 안티 - 멀웨어
  • 개인 정보 보호 브라우징
  • 간편한 사용자 정의
  • 테마와 확장의 거대한 라이브러리 고도로 확장. 확장 사용자가 화면 캡처와 같은 것들을 할 수 있도록, 파이어 폭스에 추가 기능을 추가, RSS 피드를 수집하고 다른 것들 사이에 끼어있는 정보를 체계적으로 정리. 추가 기능 관리자와 검색 엔진 관리자를 포함

 


best 3. Opera


오페라는 1996년부터 수많은 브라우저들이 생겨나고 사라지는사이에도 살아남은, 많은 골수팬들이 있는 웹브라우져입니다.

매년 새로운 버젼을 거듭하면서 기본적인 웹브라우져 기능외 여러가지 환경에서의 확장기능을 늘려가고있습니다.
상당히 많은 확장기능, widgets, skin 등으로 사용자 편의를 위해 제공되고있고, 더 많은 발전 가능성을 보여주기에도 충분한 웹 브라우저 입니다. 
더 쓸말이 없네요 -0-;; 

http://www.opera.com/


Opera는 현재 사용중인 모든 주요 웹 표준을 지원합니다.

오페라 persisent 연결, 캐시 제어, 기본 인증, 다운로드, SSL 버전 3 / TLS 1.0 및 1.1 지원, HTTP 프록시, FTP, 고퍼 및 WAIS을 재개로 HTTP 1.0 및 HTTP 1.1을 지원합니다. 그것은 HTTP (웹), NNTP (뉴스), POP 및 SMTP (이메일)를, 256 비트 암호화를 제공합니다.

 오페라 11.10

가격은
다운로드 무료 

크기
10.8 메가바이트의 
라이센스

독점 

개발자
오페라 소프트웨어

웹사이트 
www.opera.com

시스템 요구 사항
표준 C + + 라이브러리 
X11R6.3 + 구현

지원 사이트 :
오페라 자습서 ,  포럼 , 메일링리스트

선택된 리뷰 : 
Linux.com , 리눅스 매거진 , 오페라 조심 , Softpedia ,BlogSpot이

기타 기능은 다음과 같습니다 :

  • 즐겨찾는 웹 사이트에 빠르게 액세스할 수 있도록 단축 다이얼
  • 오페라 터보가 - 오페라의 서버를 통해 웹 페이지를 압축
  • 내용 및 팝업 차단 광고 또는 이미지, 256 비트 암호화, 보안 바, 쿠키 제어를 제거하는
  • 위젯, 작은 웹 애플 리케이션 (멀티미디어, 뉴 스피드, 게임 등)
  • 미리보기 미리보기
  • 사기 방지
  • 다운로드 진행 상황을 보여주는 전송 관리자
  • 비밀 번호 관리자는 웹 사이트에 대한 사용자 이름과 암호를 기억
  • 탭 브라우징
  • 통합 검색
  • 탭 집합이 나중에 retieval을 위해 저장될 수도 있습니다 세션
  • 오페라 메일, 내장 POP / IMAP 뉴스 리더, 메일링리스트를 구성,와 RSS / Atom 뉴 스피드 리더와 E - 메일 클라이언트
  • IRC 채팅 클라이언트를
  • 비트 토 런트 지원 내장
  • 스킨 너무 브라우저가 사용자 정의 모양을 갖고
  • 접근성 기능
  • 전체 화면 모드
  • 키오스크 모드 (공공 장소에서 무인 컴퓨터 잠금 다운 모드)
  • 유니 코드 지원
  • 양방향 텍스트에 대한 지원
  • 확장 가능한 벡터 그래픽 (SVG) 지원
  • 래스터 그래픽 (GIF89a, JPEG, BMP, ICO, WBMP, 그리고 PNG)
  • 화면 웹사이트가 귀하의 개인 데이터와 팝업 차단에 대한 스파이웨어 또는 "피싱"을 다운로드 고급 보안 기능
  • 여러 웹 페이지가 동일한 브라우저 창에서 열 수 있도록 탭 브라우징
  • 맞춤법 검사기
  • 라이브 북마크는 북마크 도구 모음 또는 메뉴에서 해당 뉴스 또는 블로그 헤드 라인과 같은 웹 피드를 볼 수 있습니다
  • 증분 찾을
  • 통합 다운로드 관리자
  • 제안 목록 (구글, 야후와 Answers.com을위한 작품) 드롭 다운과 함께 검색 시스템
  • 파이어 폭스가 마지막으로 폐쇄되었을 때 당신은 위치로 돌아갈 수 있도록 세션 복원 내장
  • 웹 수수료 (RSS)는 통합 사용자가 마우스 클릭으로 인기있는 RSS 리더에 RSS 피드를 추가할 수 있도록
  • DHTML 접근에 대한 지원
  • 자동 업데이트
  • 테마와 확장의 거대한 라이브러리 고도로 확장. 확장 사용자가 화면 캡처와 같은 것들을 할 수 있도록, 파이어 폭스에 추가 기능을 추가, RSS 피드를 수집하고 다른 것들 사이에 끼어있는 정보를 체계적으로 정리. 추가 기능 관리자와 검색 엔진 관리자를 포함
  • HTML 4.01, XHTML 1.0과 XHTML 모듈화, XHTML 1.1, XHTML 기본, OMA XHTML 모바일 프로필, XHTML + 음성 프로파일 1.2, WML 1.3과 2.0, 위젯 지원, XML, XSL 1.0, XPath는 1.0 및 XSL - 정, XML 네임 스페이스 지원 , XML 이벤트, CSS 레벨 1, 2, 2.1, CSS 모바일 프로파일, WAP CSS, ECMAScript, DOM, DOM2 코어, DOM이 HTML, DOM 2 이벤트, DOM이 스타일, DOM이 범위,​​ DOM이 탐색, DOM 3로드 및 저장, DOM 3 XPath는, XMLHttpRequest의, 캔버스, 웹 폼 2.0 실험 지원

 


best 4. Swiftfox

 
Swiftfox는 파이어폭스의 오픈소스로 만들어진 파이어폭스 최적화된 버전입니다. 다른 프로세서 , 아키텍처에 대한 빌드를 제공함으로써 파이어 폭스의 속도문제 중 일부를 해결하면서 모질라 파이어 폭스 옵션의 대부분을 제공합니다. 
파이어 폭스 플러그인 과 모질라 엔진을 사용합니다.  파이어 폭스가 좀 느리다고생각하시는 분들은 Swiftfox를 사용해보시느것도 좋을듯합니다. 자신의 프로세서 특성에 맞게 다운로하고 설치하시면 됩니다.
http://getswiftfox.com/


best 5. Seamonky


Mozila 브라우져의 코드를 기반으로 만들어진 또다른 웹 브라우져입니다. firefox와 다른점은 사용자에게 완벽한, 올인원 인터넷 어플리케이션을 제공하려는 시도를 한것입니다. 인터넷 브라우져 기능, 메일 클라이언트 IRC채팅 뿐아니라 뉴스 그룹 및 RSSfeed 리더 를 포함하고있습니다. 

http://www.seamonkey-project.org/


잉여 브라우져들 ㅡ.,ㅡ;

Konqueror
Konqueror는 KDE데스크탑의 기본 웹 브라우저와 파일 관리자 입니다.
Konqueror는 Kontact 같은 다른 기본KDE 응용 프로그램과 통합 및 데스크탑에서의 원할한 브라우징을 사용자에게 제공합니다.
Konqueror에서는 자바스크립트, 자바 애플릿, CSS1, CSS2.1 을 지원하고 넷스케이프 플러그인을 통해 Flash 와 RealVideo기능을 제공합니다.



Dillo 
작고, 안정적이며, 개발자에게 친숙한 빠르고 유연한 웹브라우져 입니다.
http://www.dillo.org/ 

Arora
Qt 툴킷을 사용한 간단한 웹킷 기반의 웹 브라우져 입니다.
http://code.google.com/p/arora/


텍스트 모드 브라우져

ELinks
텍스트 모드에서 많은 기능을 내장한 웹브라우징 프로그램


Lynx
완전빠르고 사용하기 쉬운 브라우져 .. 초 단순함.

뽀나쓰, 웹브라우저의 역사?


리눅스 민트 기본서체 를.


DAUM서체로 교체! (탱구사진 뽀나쓰...ㅡ.,ㅡ;)


DAUM에서 트루타입글꼴을 공개했고 많은 사용 바란답니다. 사용해줘야죠;;
데비안, 우분투 계열의 리눅스인 리눅스민트11에서 적용해보았습니다.
http://info.daum.net/Daum/info/introduceOfCI.do

http://search.daum.net/search?w=tot&DA=YZRR&t__nil_searchbox=btn&sug=&q=%EB%8B%A4%EC%9D%8C%EC%84%9C%EC%B2%B4 에서 폰트 다운로드를 합니다.


다음과같이 폰트를 
/usr/share/fonts/freefonts 에 복사를 합니다.
우선 freefonts 디렉토리를 만들어야합니다.
#cd /usr/share/fonts                           // 로이동해서 
#mkdir freefonts                                // 디렉토리를 만들어줍니다.
폰트를 다운받은 디렉토리로 이동후
#sudo mv *.ttf /usr/share/fonts/freefonts  // 폰트를 복사합니다.
#fc-cache -f -v                                  // 폰트를 갱신합니다.

다시 로그인하면 복사한 폰트로 변경됩니다.  
 
jabcholove@jabcho ~/다운로드 $ ls -a
.  ..  Daum_Regular.ttf  Daum_SemiBold.ttf


jabcholove@jabcho ~/다운로드 $ sudo mv *.ttf /usr/share/fonts/freefonts
[sudo] password for jabcholove: 
 
jabcholove@jabcho ~/다운로드 $ fc-cache -f -v
/usr/share/fonts: caching, new cache contents: 0 fonts, 5 dirs
/usr/share/fonts/X11: caching, new cache contents: 0 fonts, 4 dirs
/usr/share/fonts/X11/Type1: caching, new cache contents: 44 fonts, 0 dirs
/usr/share/fonts/X11/encodings: caching, new cache contents: 0 fonts, 1 dirs
/usr/share/fonts/X11/encodings/large: caching, new cache contents: 0 fonts, 0 dirs
/usr/share/fonts/X11/misc: caching, new cache contents: 0 fonts, 0 dirs
/usr/share/fonts/X11/util: caching, new cache contents: 0 fonts, 0 dirs
/usr/share/fonts/cmap: caching, new cache contents: 0 fonts, 2 dirs
/usr/share/fonts/cmap/adobe-japan1: caching, new cache contents: 0 fonts, 0 dirs
/usr/share/fonts/cmap/gs-cjk-resource: caching, new cache contents: 0 fonts, 0 dirs
/usr/share/fonts/freefonts: caching, new cache contents: 2 fonts, 0 dirs
/usr/share/fonts/truetype: caching, new cache contents: 0 fonts, 11 dirs
/usr/share/fonts/truetype/alee: caching, new cache contents: 5 fonts, 0 dirs
/usr/share/fonts/truetype/freefont: caching, new cache contents: 12 fonts, 0 dirs
/usr/share/fonts/truetype/openoffice: caching, new cache contents: 1 fonts, 0 dirs
/usr/share/fonts/truetype/ttf-dejavu: caching, new cache contents: 21 fonts, 0 dirs
/usr/share/fonts/truetype/ttf-droid: caching, new cache contents: 9 fonts, 0 dirs
/usr/share/fonts/truetype/ttf-liberation: caching, new cache contents: 12 fonts, 0 dirs
/usr/share/fonts/truetype/ttf-sil-gentium: caching, new cache contents: 4 fonts, 0 dirs
/usr/share/fonts/truetype/ttf-sil-gentium-basic: caching, new cache contents: 8 fonts, 0 dirs
/usr/share/fonts/truetype/ubuntu-font-family: caching, new cache contents: 6 fonts, 0 dirs
/usr/share/fonts/truetype/unfonts: caching, new cache contents: 15 fonts, 0 dirs
/usr/share/fonts/truetype/wqy: caching, new cache contents: 2 fonts, 0 dirs
/usr/share/fonts/type1: caching, new cache contents: 0 fonts, 2 dirs
/usr/share/fonts/type1/gsfonts: caching, new cache contents: 35 fonts, 0 dirs
/usr/share/fonts/type1/mathml: caching, new cache contents: 1 fonts, 0 dirs
/usr/X11R6/lib/X11/fonts: skipping, no such directory
/usr/local/share/fonts: caching, new cache contents: 0 fonts, 0 dirs
/home/jabcholove/.fonts: skipping, no such directory
/var/cache/fontconfig: not cleaning unwritable cache directory
/home/jabcholove/.fontconfig: cleaning cache directory
fc-cache: succeeded
jabcholove@jabcho ~/다운로드 $  

 










우분투, 데비안은  sudo apt-get install nautilus-open-terminal 
 
레드헷, 페도라는 sudo yum install nautilus-open-terminal


 설치후 다시로그인하면 적용됩니다.

Gnome3에서 바탕화면 활용하기와  함께 설치해줍니다.

2011/06/19 - [Linux] - Gnome3 에서 바탕화면 활용하기 

탱구 오른쪽에 시스템정보 쮸루룩나오는게 conky 라는 겁니다. 
사용자에 구미에 맞게 다양하게 꾸밀수있어서 엄청나게 인기 있다는거져.
데스크탑리눅스를 사용하시는분이라면 누~~구~~나 한번쯤은 설치해보는 앱 이라는거죠~~~~~~


1. 쉬운설치방법- 열우분투,데비안계열
소프트웨어관리자에서 conky 치고 conky 설치 ㅡ.,ㅡ; 쉽죠

conky-lua 스킨을 사용하실꺼면 conky-all을 설치하시면 됩니다. 
설치후 - ㅣua 스킨적용 = 
2011/06/16 - [Linux] - conky - skin (Conky lua 2011 )

 



2. 직접 받아서 컴파일후 설치

 1.소스를 직접 컴파일하는 방법 [http]conky소스포지에서 소스를 다운로드하고 난후 압축을 풉니다. 소스로 부터 컴파일하는 방법은 아래와 같습니다. 컴파일시에 X11 development libraries 6.8.2이상의 버전을 요구합니다. 대부분의 배포판 패키지 패키지명이 libx11-dev일것입니다.


$ tar zjvf conky-1.x.x.tar.bz2 혹은 tar zxvf conky-1.x.x.tar.gz
$ ./configure
$ make
# make install
 

 
3. 패키지 관리자로 설치 
  - 젠투 는
# emerge app-admin/conky 

 - Debian, Ubuntu
# apt-get install conky                                                                       //apt-get 으로 설치
$ zcat /usr/share/doc/conky/examples/conkyrc.sample.gz > ~/.conkyrc     //conkyrc 는 스킨같은것입니다. 다음설명참조
 


콘키 설치후 Alt+f2키를 눌뤄주시고 conky 라고 입력후 실행 하시면 보잘것없는;? 콘키가 보이게 됩니다. 한번눌르면 사라집니다. ㅋ 스킨을 꾸미면서 바탕에 항상 떠있도록 수정을 같이해주는겁니다. 우선 임시로 위에서 보신 conkyrc를 사용자 홈폴더로 복사를 해줍니다. 보통 사용자 홈폴더는 $home/~사용자아이디 요딴식으로 되어있고, 그안에 .conkyrc 를 실행될때마다 읽어서 스킨을 띄워줍니다.


기본 텍스트스킨 복사하기. (페이지 맨위에 보이는스킨입니다.)


1. cd ~ 로 홈폴더로 이동

2. cp 명령으로 conkyrc_skin 을 .conkyrc 로 이름바꾸면서 복사


ubuntu 실행시 자동실행
우분투가 켜지면 자동으로 실행되도록 시작프로그램에 등록하도록 하겠습니다.


맨 위의 메뉴모음에서 '시스템 - 기본 설정 - 시작 응용 프로그램'  실행
시작프로그램에서 추가를 누르고 다음을 입력

이름(N): Conky
명령(M): sh -c "sleep 5; exec conky"

혹은 터미널에서

# gnome-session-properties


참조 사이트

http://wiki.kldp.org/wiki.php/Conky

http://conky.sourceforge.net/docs.html


스킨 사이트
http://gnome-look.org/content/search.php
Description contains에 conkyrc 라고 입력후 Search 클릭




.conkyrc 설정


1. conky commond option

        $conky [option] ....

        -v | -V | --verbose
            버전표시

        -a | --alignment= ALIGNMENT -a | --alignment= ALIGNMENT
            Conky의 표시위치 지정
            ex> -a top_right (Text alignment on screen, {top,bottom}_{left,right} or none)

        -b | --double-buffer
            이중 버퍼링을 사용하여 ( "깜박임") 제거

        -c | --config= FILE -c | --config= FILE
            conkyrc 의 경로를 지정해줌. 지정을 하지 안을경우
            $HOME/.conkyrc파일을 기본으로 읽어들임

        -d | --daemonize
            데몬형태로 실행, 백그라운드로 실행

        -f | --font= FONT -f | --font= FONT
            conky에서 사용할 글꼴 지정

        -h | --help
            도움말 출력

        -o | --own-window
            윈도우로 실행

        -t | --text= TEXT -t | --text= TEXT
            텍스트를 표시 ex> -t '$uptime'

        -u | --interval= SECONDS -u | --interval= SECONDS
            업데이트 간격 초단위

        -w | --window-id= WIN_ID -w | --window-id= window -w | --window-id= WIN_ID
            Window id 지정

        -x X_COORDINATE -x X_COORDINATE
            x축(가로) 출력좌표 지점

        -y Y_COORDINATE -y Y_COORDINATE
            y축(세로) 출력좌표 지점
            
        -i COUNT
            count만큼의 초가 지난후 종료.


2. Configuration Settings (.conkyrc)
    
    .conkyrc : TEXT를 기준으로 위쪽은 셋팅 아래쪽은 화면출력.
    
    == 설정 ==
    
    alignment [top_left | top_right | bottom_left | bottom_right | ... ]
        - conky의 화면상의 상대적인 위치를 지정.
        - values : 위치 - top,bottom / 값 - left,right,middle 
                    ex > alignment top_left
                     
    background [yes | no]
        - conky가 데몬형태로 실행될지 결정, boolean값(1,0 or yes,no)으로 설정
        
    border_margin [pixel]
        - 테두리의 여백 픽셀 설정
    border_width [pixel]
        - 테두리의 가로 픽셀 설정
        
    color0~9 [색상이름 | 색상값]
        - 텍스트 세그먼트를 사용하기 위해 내부 색상 변수
        ex >    color2 red
                color3 blue
        
    cpu_avg_samples [1 | 2 | 3 | 4]
        - 평균 CPU를 모니터링하기위한 표본의 수
        ex> 펜티엄4 1, 듀얼 2, 쿼드코어 4
    top_cpu_separate [true,false]
        - true 일경우 프러세서 1개의 사용량을 나타냅니다. false일경우 모든 프로세서를 보여줌.
        ex> 펜티엄4의 경우 true 값으로, 듀얼 또는 쿼드코어 일경우 false로 설정

    default_color [색상이름 | 색상값]
        - 기본색상과 테두리색상
    default_outline_color [색상이름 | 색상값]
        - 기본 테두리 색상
    default_shade_color [색상이름 | 색상값]
        - 그림자 색상
        ex> 보편적으로 white red blue 와 같이  텍스트로 지정할수도 있으나 직접 색상값을 넣을수도 있음 FFFFFF,FAFAFA

    draw_borders [yes | no]
        - 텍스트 주위의 테두리 주변에 글자
    draw_graph_borders [yes | no]
        - 그래프 주위에 경계
    draw_outline [yes | no]
        - 바깥선 그리기
    draw_shades [yes | no]
        - 그림자 그리기
    
    double_buffer [yes | no]
        - Xdbe를 확장하여 사용(깜빡임을 제거), 사용하여도 차이가 별로 없으니 추천
        ex> double_buffer yes
        
    font
        - fontsel의 폰트를 얻는데 사용할 수 있다
        
    gap_x [pixel]
    gap_y [pixel]
        - 테두리에서 화면까지의 간격 지정
    
    max_port_monitor_connections [0~256]
        - 연결을 추적하기 위한 지정한 수만큼의 각각의 포트감시를 허용.
        - 지정하지 안을경우 기본값 : 256
        
    maximum_width [pixel]
        - 윈도우의 최대 너비
    minimum_size width [x pixel, y pixel]
        - 윈도우의 최소 크기

    mpd_host
    mpd_port
    mpd_password
        - mdp-server host/port/password
    
    music_player_interval
        - 뮤직 플레이어 스레드의 업데이트 간격
    
    net_avg_samples
        - 네트워크 트래픽을 내기위한 샘플자료의 수
    no_buffers [yes | no]
        - 파일 시스템을 사용하는 메모리에서 버퍼
    
    override_utf8_locale [yes | no]
        -     UTF8 로케일 적용, XFT필요 
        
    own_window [yes | no]
        - 창 만들기. 하위 옵션값에 영향을 줌.
    own_window_class
        - WM_CLASS 이름을 수동으로 설정할 수있다. 기본값 - Conky
    own_window_colour [색상이름 | 색상값]
        - own_window_transparent의 값이 no일때 적용됨.
    own_window_hints [undecorated,below,above,sticky,skip_taskbar,skip_pager]
        - 창관리자 출력여부에 영향을 미침.
    own_window_title [text]
        - 창 이름을 수동으로 설정할 수있다. 기본값 - <hostname> - conky
    own_window_transparent [yes | no]
        - 창 배경 투명도를 결정한다. no일경우 own_window_colour값이 배경색상이됨.
          own_window_colour값을 설정하지 안을경우 기본값 - black.
    own_window_type [normal | override]
        - normal : 다른 윈도우와 같이 취급, 창 관리자의 통제에 있음.
        - override : own_window_hints가 무시되고. 항상 바탕화면에서 볼수 있게되며, 창문을 무효화 창 관리자의 통제에서 벗어남.
    
    out_to_console
        - 표준 출력으로 텍스트를 출력
        
    pad_percents
        - 이 수에 % 넣기 (0= % 넣지 않음)
    
    pop3
        - 기본값 global POP3 server
        - 인수 : "host user pass [-i interval] [-p port] [-e command]"
                기본간격(interval) - 5분 / 기본포트 : 110 / 비밀번호가 "*"으로 입력될때 conky가 시작될때 암호입력 메시지가 뜸.
    
    short_units [yes | no]
        - 단위의 단축 (kiB->k, GiB->G, etc.) 기본값 : no
    
    stippled_borders
        - 점선 경계(픽셀)
    
    total_run_times
        - 종료전에 conky를 갱신하기 위한 총 숫자. 영(0)은 conky를 계속 실행하게 함.
    
    update_interval
        - conky 업데이트 간격 (단위 : 초)
        
    uppercase [yes | no]
        - 텍스트를 대문자로 표시여부
    
    use_spacer
        - 주변의 다른 것들과 같이 움직이는 것을 막으려면 오브젝트 다음에 스페이스를 추가 합니다.
        이것은 비트스트림 베라 산스 모노와 같은 모노 폰트 폰트를 사용하는 할 때만 효과가 있음.
        
    use_xft
        - Xft사용 (anti-aliased font and stuff)
    xftalpha [0~1]
        - xft 폰트의 알파값을 지정 0~1 사이 값. ex> aftalpha 0.5
    xftfont
        - xft 폰트 사용 ex> xftfont sans:style=Bold:size=10
        
    TEXT
        - 이후 값은 화면에 출력되는 부분임.
    
    
    == 출력 변수 ==

    

    변수 앞에는 늘 "$"표시가 붙는다.

    EX ) 변수만 쓸땐 $color 덜렁 써두면 기본컬러가 적용되고 ${color white} or ${color ffffff} 으로 지정해줄수 있다

    한번 적용하면 뒤엣 글자까지 모두 적용되기 때문에 적용시키려는 문자끝에 $color를 붙여 칼러를 기본컬러로 변경시켜주는것이 좋다

    아래 변수들을 참고해서 멋진 conky를 만들어보기 바란다.

addr interface
IP address for an interface
addrs interface
IP addresses for an interface (if one - works like addr). Linux only.
acpiacadapter
ACPI ac adapter state.
acpifan
ACPI fan state
acpitemp
ACPI temperature in C.
acpitempf
ACPI temperature in F.
adt746xcpu
CPU temperature from therm_adt746x
adt746xfan
Fan speed from therm_adt746x
alignr (num)
Right-justify text, with space of N
alignc (num)
Align text to centre
apm_adapter
Display APM AC adapter status (FreeBSD only)
apm_battery_life
Display APM battery life in percent (FreeBSD only)
apm_battery_time
Display remaining APM battery life in hh:mm:ss or "unknown" if AC adapterstatus is on-line or charging (FreeBSD only)
audacious_bar (height),(width)
Progress bar
audacious_bitrate
Bitrate of current tune
audacious_channels
Number of audio channels of current tune
audacious_filename
Full path and filename of current tune
audacious_frequency
Sampling frequency of current tune
audacious_length
Total length of current tune as MM:SS
audacious_length_seconds
Total length of current tune in seconds
audacious_playlist_position
Playlist position of current tune
audacious_playlist_length
Number of tunes in playlist
audacious_position
Position of current tune (MM:SS)
audacious_position_seconds
Position of current tune in seconds
audacious_status
Player status (Playing/Paused/Stopped/Not running)
audacious_title (max length)
Title of current tune with optional maximum length specifier
battery (num)
Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0).
battery_bar (height),(width) (num)
Battery percentage remaining of ACPI battery in a bar. ACPI battery number can be given as argument (default is BAT0).
battery_percent (num)
Battery percentage remaining for ACPI battery. ACPI battery number can be given as argument (default is BAT0).
battery_time (num)
Battery charge/discharge time remaining of ACPI battery. ACPI battery number can be given as argument (default is BAT0).
bmpx_artist
Artist in current BMPx track
bmpx_album
Album in current BMPx track
bmpx_title
Title of the current BMPx track
bmpx_track
Track number of the current BMPx track
bmpx_bitrate
Bitrate of the current BMPx track
bmpx_uri
URI of the current BMPx track
buffers
Amount of memory buffered
cached
Amount of memory cached
color (color)
Change drawing color to color
color0
Change drawing color to color0 configuration option
color1
Change drawing color to color1 configuration option
color2
Change drawing color to color2 configuration option
color3
Change drawing color to color3 configuration option
color4
Change drawing color to color4 configuration option
color5
Change drawing color to color5 configuration option
color6
Change drawing color to color6 configuration option
color7
Change drawing color to color7 configuration option
color8
Change drawing color to color8 configuration option
color9
Change drawing color to color9 configuration option
conky_version
Conky version
conky_build_date
Date Conky was built
conky_bulid_arch
CPU architecture Conky was built for
cpu (cpuN)
CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu cpuX} (X >= 1) are individual CPUs.
cpubar (cpu number) (height),(width)
Bar that shows CPU usage, height is bar's height in pixels. See $cpu for more info on SMP.
cpugraph (cpu number) (height),(width) (gradient colour 1) (gradient colour 2)
CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP.
diskio (device)
Displays current disk IO. Device is optional, and takes the form of sda for /dev/sda. Individual partitions are allowed.
diskiograph (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale)
Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
diskio_read (device)
Displays current disk IO for reads. Device as in diskio.
diskiograph_read (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale)
Disk IO graph for reads, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio.
diskio_write (device)
Displays current disk IO for writes. Device as in diskio.
diskiograph_write (device) (height),(width) (gradient colour 1) (gradient colour 2) (scale)
Disk IO graph for writes, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio.
disk_protect device
Disk protection status, if supported (needs kernel-patch). Prints either "frozen" or "free " (note the padding).
downspeed net
Download speed in kilobytes
downspeedf net
Download speed in kilobytes with one decimal
downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2) (scale)
Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
else
Text to show if any of the above are not true
entropy_avail
Current entropy available for crypto freaks
entropy_bar (height),(width)
Normalized bar of available entropy for crypto freaks
entropy_poolsize
Total size of system entropy pool for crypto freaks
exec command
Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch.
execbar command
Same as exec, except if the first value return is a value between 0-100, it will use that number for a bar. The size for the bar is currently fixed, but that may change in the future.
execgraph command
Same as execbar, but graphs values.
execi interval command
Same as exec but with specific interval. Interval can't be less than update_interval in configuration. See also $texeci
execibar interval command
Same as execbar, except with an interval
execigraph interval command
Same as execgraph, but takes an interval arg graphs values
execp command
Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch. This differs from $exec in that it parses the output of the command, so you can insert things like ${color red}hi!${color} in your script and have it correctly parsed by Conky. Caveats: Conky parses and eval!uates the output of $execp every time Conky loops, and then destroys all the objects. If you try to use anything like $execi within an $execp statement, it will functionally run at the same interval that the $execp statement runs, as it is created and destroyed at every interval.
execpi interval command
Same as execp but with specific interval. Interval can't be less than update_interval in configuration. Note that the output from the $execpi command is still parsed and eval!uated at every interval.
font (font)
Specify a different font. This new font will apply to the current line and everything following. You can use a $font with no arguments to change back to the default font (much like with $color)
freq (n)
Returns CPU #n's frequency in MHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.
freq_g (n)
Returns CPU #n's frequency in GHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.
freq_dyn
Returns CPU frequency in MHz, but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
freq_dyn_g
Returns CPU frequency in GHz, but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
fs_bar (height),(width) fs
Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system.
fs_free (fs)
Free space on a file system available for users.
fs_free_perc (fs)
Free percentage of space on a file system available for users.
fs_size (fs)
File system size
fs_type (fs)
File system type
fs_used (fs)
File system used space
goto x
The next element will be printed at position 'x'.
gw_iface
Displays the default route's interface or "multiple"/"none" accordingly.
gw_ip
Displays the default gateway's IP or "multiple"/"none" accordingly.
hddtemp dev, (host,(port))
Displays temperature of a selected hard disk drive as reported by the hddtemp daemon running on host:port. Default host is 127.0.0.1, default port is 7634.
head logfile lines (interval)
Displays first N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
hr (height)
Horizontal line, height is the height in pixels
hwmon (dev) type n
Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one hwmon device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' (Celsius) or 'tempf' (Fahrenheit) meaning temperature. Parameter n is number of the sensor. See /sys/class/hwmon/ on your local computer.
iconv_start codeset_from codeset_to
Convert text from one codeset to another using GNU iconv. Needs to be stopped with iconv_stop.
iconv_stop
Stop iconv codeset conversion.
i2c (dev) type n
I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one I2C device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' (Celsius) or 'tempf' (Fahrenheit) meaning temperature. Parameter n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer.
i8k_ac_status
If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in /proc/i8k (translated to human-readable). Beware that this is by default not enabled by i8k itself.
i8k_bios
If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k.
i8k_buttons_status
If running the i8k kernel driver for Inspiron laptops, displays the volume buttons status as listed in /proc/i8k.
i8k_cpu_temp
If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in Celsius, as reported by /proc/i8k.
i8k_cpu_tempf
If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in Fahrenheit, as reported by /proc/i8k.
i8k_left_fan_rpm
If running the i8k kernel driver for Inspiron laptops, displays the left fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
i8k_left_fan_status
If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
i8k_right_fan_rpm
If running the i8k kernel driver for Inspiron laptops, displays the right fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
i8k_right_fan_status
If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
i8k_serial
If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k.
i8k_version
If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k.
ibm_fan
If running the IBM ACPI, displays the fan speed.
ibm_temps N
If running the IBM ACPI, displays the temperatures from the IBM temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the GPU.
ibm_volume
If running the IBM ACPI, displays the "master" volume, controlled by the volume keys (0-14).
ibm_brightness
If running the IBM ACPI, displays the brigtness of the laptops's LCD (0-7).
if_empty (var)
if conky variable VAR is empty, display everything between $if_empty and the matching $endif
if_gw
if there is at least one default gateway, display everything between $if_gw and the matching $endif
if_running (process)
if PROCESS is running, display everything $if_running and the matching $endif
if_existing file (string)
if FILE exists, display everything between if_existing and the matching $endif. The optional second paramater checks for FILE containing the specified string and prints everything between $if_existing and the matching $endif.
if_mounted (mountpoint)
if MOUNTPOINT is mounted, display everything between $if_mounted and the matching $endif
if_smapi_bat_installed (INDEX)
when using smapi, if the battery with index INDEX is installed, display everything between $if_smapi_bat_installed and the matching $endif
if_up (interface)
if INTERFACE exists and is up, display everything between $if_up and the matching $endif
imap_messages (args)
Displays the number of messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command]". Default port is 143, default interval is 5 minutes. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
imap_unseen (args)
Displays the number of unseen messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command]". Default port is 143, default interval is 5 minutes. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
ioscheduler disk
Prints the current ioscheduler used for the given disk name (i.e. e.g. "hda" or "sdb")
kernel
Kernel version
laptop_mode
The value of /proc/sys/vm/laptop_mode
loadavg
(1,2,3)> System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes.
machine
Machine, i686 for example
mails (mailbox) (interval)
Mail count in the specified mailbox or your mail spool if not. Both mbox and maildir type mailboxes are supported. You can use a program like fetchmail to get mails from some server using your favourite protocol. See also new_mails.
mboxscan (-n number of messages to print) (-fw from width) (-sw subject width) mbox
Print a summary of recent messages in an mbox format mailbox. mbox parameter is the filename of the mailbox (can be encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}
mem
Amount of memory in use
membar (height),(width)
Bar that shows amount of memory in use
memmax
Total amount of memory
memperc
Percentage of memory in use
mpd_artist
Artist in current MPD song must be enabled at compile
mpd_album
Album in current MPD song
mpd_bar (height),(width)
Bar of mpd's progress
mpd_bitrate
Bitrate of current song
mpd_status
Playing, stopped, et cetera.
mpd_title (max length)
Title of current MPD song
mpd_vol
MPD's volume
mpd_elapsed
Song's elapsed time
mpd_length
Song's length
mpd_percent
Percent of song's progress
mpd_random
Random status (On/Off)
mpd_repeat
Repeat status (On/Off)
mpd_track
Prints the MPD track field
mpd_name
Prints the MPD name field
mpd_file
Prints the file name of the current MPD song
mpd_smart
Prints the song name in either the form "artist - title" or file name, depending on whats available
nameserver (index)
Print a nameserver from /etc/resolv.conf. Index starts at and defaults to 0.
new_mails (mailbox) (interval)
Unread mail count in the specified mailbox or mail spool if not. Both mbox and maildir type mailboxes are supported.
nodename
Hostname
outlinecolor (color)
Change outline color
pb_battery item
If running on Apple powerbook/ibook, display information on battery status. The item parameter specifies, what information to display. Exactly one item must be specified. Valid items are:
status: Display if battery is fully charged, charging, discharging or absent (running on AC)
percent: Display charge of battery in percent, if charging or discharging. Nothing will be displayed, if battery is fully charged or absent.
time: Display the time remaining until the battery will be fully charged or discharged at current rate. Nothing is displayed, if battery is absent or if it's present but fully charged and not discharging.
platform (dev) type n
Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one platform device. Platform type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' (Celsius) or 'tempf' (Fahrenheit) meaning temperature. Parameter n is number of the sensor. See /sys/bus/platform/devices/ on your local computer.
pop3_unseen (args)
Displays the number of unseen messages in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command]". Default port is 110, default interval is 5 minutes. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
pop3_used (args)
Displays the amount of space (in MiB, 2^20) used in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command]". Default port is 110, default interval is 5 minutes. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
pre_exec shell command
Executes a shell command one time before conky displays anything and puts output as text.
processes
Total processes (sleeping and running)
running_processes
Running processes (not sleeping), requires Linux 2.6
shadecolor (color)
Change shading color
smapi (ARGS)
when using smapi, display contents of the /sys/devices/platform/smapi directory. ARGS are either '(FILENAME)' or 'bat (INDEX) (FILENAME)' to display the corresponding files' content. This is a very raw method of accessing the smapi values. When available, better use one of the smapi_* variables instead.
smapi_bat_perc (INDEX)
when using smapi, display the remaining capacity in percent of the battery with index INDEX. This is a separate variable because it supports the 'use_spacer' configuration option.
smapi_bat_bar (INDEX),(height),(width)
when using smapi, display the remaining capacity of the battery with index INDEX as a bar.
stippled_hr (space)
Stippled (dashed) horizontal line
swapbar (height),(width)
Bar that shows amount of swap in use
swap
Amount of swap in use
swapmax
Total amount of swap
swapperc
Percentage of swap in use
sysname
System name, Linux for example
tcp_portmon port_begin port_end item (index) (ip4 only at present)
TCP port monitor for specified local ports. Port numbers must be in the range 1 to 65535. Valid items are:
count - total number of connections in the range
rip - remote ip address
rhost - remote host name
rport - remote port number
rservice - remote service name from /etc/services
lip - local ip address
lhost - local host name
lport - local port number
lservice - local service name from /etc/services
The connection index provides you with access to each connection in the port monitor. The monitor will return information for index values from 0 to n-1 connections. Values higher than n-1 are simply ignored. For the "count" item, the connection index must be omitted. It is required for all other items.
Examples:
${tcp_portmon 6881 6999 count} - displays the number of connections in the bittorrent port range
${tcp_portmon 22 22 rip 0} - displays the remote host ip of the first sshd connection
${tcp_portmon 22 22 rip 9} - displays the remote host ip of the tenth sshd connection
${tcp_portmon 1 1024 rhost 0} - displays the remote host name of the first connection on a privileged port
${tcp_portmon 1 1024 rport 4} - displays the remote host port of the fifth connection on a privileged port
${tcp_portmon 1 65535 lservice 14} - displays the local service name of the fifteenth connection in the range of all ports
Note that port monitor variables which share the same port range actually refer to the same monitor, so many references to a single port range for different items and different indexes all use the same monitor internally. In other words, the program avoids creating redundant monitors.
texeci interval command
Runs a command at an interval inside a thread and displays the output. Same as $execi, except the command is run inside a thread. Use this if you have a slow script to keep Conky updating. You should make the interval slightly longer then the time it takes your script to execute. For example, if you have a script that take 5 seconds to execute, you should make the interval at least 6 seconds. See also $execi.
offset (pixels)
Move text over by N pixels. See also $voffset.
rss url delay_in_minutes action item_num
Download and parse RSS feeds. Action may be one of the following: feed_title, item_title (with num par), item_desc (with num par) and item_titles.
tab (width, (start))
Puts a tab of the specified width, starting from column 'start'.
tail logfile lines (interval)
Displays last N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
time (format)
Local time, see man strftime to get more information about format
utime (format)
Display time in UTC (universal coordinate time).
tztime (timezone) (format)
Local time for specified timezone, see man strftime to get more information about format. The timezone argument is specified in similar fashion as TZ environment variable. For hints, look in /usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc.
totaldown net
Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before conky has started.
top type, num
This takes arguments in the form:top (name) (number) Basically, processes are ranked from highest to lowest in terms of cpu usage, which is what (num) represents. The types are: "name", "pid", "cpu", "mem", "mem_res", "mem_vsize", and "time". There can be a max of 10 processes listed.
top_mem type, num
Same as top, except sorted by mem usage instead of cpu
totalup net
Total upload, this one too, may overflow
updates Number of updates
for debugging
upspeed net
Upload speed in kilobytes
upspeedf net
Upload speed in kilobytes with one decimal
upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2) (scale)
Upload speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
uptime
Uptime
uptime_short
Uptime in a shorter format
user_number
Number of users logged in
user_names
Lists the names of the users logged in
user_terms
Lists the consoles in use
user_times
Lists how long users have been logged in for
voffset (pixels)
Change vertical offset by N pixels. Negative values will cause text to overlap. See also $offset.
voltage_mv (n)
Returns CPU #n's voltage in mV. CPUs are counted from 1. If omitted, the parameter defaults to 1.
voltage_v (n)
Returns CPU #n's voltage in V. CPUs are counted from 1. If omitted, the parameter defaults to 1.
wireless_essid net
Wireless access point ESSID (Linux only)
wireless_mode net
Wireless mode (Managed/Ad-Hoc/Master) (Linux only)
wireless_bitrate net
Wireless bitrate (ie 11 Mb/s) (Linux only)
wireless_ap net
Wireless access point MAC address (Linux only)
wireless_link_qual net
Wireless link quality (Linux only)
wireless_link_qual_max net
Wireless link quality maximum value (Linux only)
wireless_link_qual_perc net
Wireless link quality in percents (Linux only)
wireless_link_bar (height), (width) net
Wireless link quality bar (Linux only)
xmms2_artist
Artist in current XMMS2 song
xmms2_album
Album in current XMMS2 song
xmms2_title
Title in current XMMS2 song
xmms2_genre
Genre in current XMMS2 song
xmms2_comment
Comment in current XMMS2 song
xmms2_decoder
Decoder plugin used
xmms2_transport
Transport plugin used
xmms2_url
Full path to current song
xmms2_tracknr
Track number in current XMMS2 song
xmms2_bitrate
Bitrate of current song
xmms2_id
XMMS2 id of current song
xmms2_duration
Duration of current song
xmms2_elapsed
Song's elapsed time
xmms2_size
Size of current song
xmms2_percent
Percent of song's progress
xmms2_status
XMMS2 status (Playing, Paused, Stopped, or Disconnected)
xmms2_bar (height),(width)
Bar of XMMS2's progress
xmms2_smart
Prints the song name in either the form "artist - title" or file name, depending on whats available

 

Puppy linux


Scientific linux


Zorin OS linux



6개월전과 배교해서 작은변화가 있다면..
우분투 리눅스의 세분화로인해 순위자체는 우분투가 2위로되어있지만.
우분투 빼밀리들이 모인다면 명실상고 데스크탑분야의 1위는 우분투입니다.
현제 1위로 올라와있는 리눅스민트 역시 우분투Gnome의 판생판으로서, 한글화가 정말 잘되있는 배포판입니다. 타국가의 언어역시 굿.
Linux mint 11 (Katya)가 나온지 얼마 안되어서 인기가 꾸준하게 상승중이고, 3위로 올라온 Fedora역시 opensuse를 밟고 3위로 올라와있네요, Fedora15(lovelock)이 5월말쯤 나와서 사용자가 좀 늙어가는상황,  opensuse는 11.4버젼이 3월부터 사용되었고 현재는 12.1(milestone 1) 이 개발과 동시에 비정식판 개발버젼이 동시배포되고있으나, 자잘한 버그와 에러가 있는관계로 사용 7일만에 민트로 다시 깔았었습니다. opensuse12 정식판이 나온다면 다시 활기를 찾겠죠 ㅎ.

눈여겨볼만한 배포판 몇가지를 보자면 레드헷 계열의 Scientific ,우분투 계열의 Zorin, 독립적인 Puppy 리눅스 등등 개발되는 배포판들이 많지만. 개발에 박차를 가하고 있는 Scientific는 각국 다양한 언어와 방화벽강화등으로 뛰어난 안정성을 자랑하고,
Zorin은 윈도우와 유사한 그래픽환경으로 초보 리눅서 들에게 거부감없고, 우분투의 패키지 매니져와 호환되어 쉬운패키지설치 삭제로 꾸준하게 사용자가 늘어나고 있습니다.
Puppy는 자체 개발로 꾸준하게 코딩되고있는 가벼운! 배포판으로 여러가지 파생배포판이 나올정도로 큰가능성을 보여주면서, 순위가 많이 올라오고 있습니다.


순위배포본H.P.D*
1Mint 2522>
2Ubuntu 2505<
3Fedora 1801>
4Debian 1410>
5openSUSE 1256<
6Arch 1128>
7PCLinuxOS 953>
8Puppy 852>
9CentOS 832>
10Slackware 816<
11Mandriva 718=
12Chakra 622>
13Mageia 611<
14Lubuntu 565>
15MEPIS 563=
16Sabayon 502<
17Scientific 490>
18Zenwalk 469>
19Gentoo 433<
20Ultimate 432<
21Bodhi 429<
22Zorin 418>
23Kubuntu 411>
24Red Hat 400<
25FreeBSD 399>
26Pinguy 394>
27CrunchBang 384=
28Xubuntu 378>
29BackTrack 347=
30Vector 343<
31Tiny Core 326<
32Macpup 316>
33PC-BSD 313>
34Peppermint 287>
35KNOPPIX 286=
36FreeNAS 284<
37MeeGo 282=
38antiX 280>
39Salix 267>
40Unity 263=
41Ubuntu Studio 263=
42Super OS 263>
43SliTaz 244<
44ClearOS 238>
45Pardus 236>
46Clonezilla 225=
47Incognito 218>
48Fusion 217<
49SalineOS 212>
50Oracle 212=
51linuX-gamers 206>
52Kororaa 205=
53Joli OS 205<
54RIPLinuX 201>
55Parted Magic 201>
56Frugalware 192=
57Dreamlinux 191=
58OpenBSD 190=
59ArchBang 190<
60Absolute 186=
61Toorox 180>
62SystemRescue 175=
63DragonFly 174=
64Mythbuntu 171>
65aptosid 170<
66Kongoni 169<
67Legacy 166=
68ZevenOS 162=
69moonOS 161=
70Alpine 159=
71wattOS 158=
72Trisquel 150>
73Foresight 150<
74CTKArch 149>
75Calculate 144<
76GParted 141=
77AriOS 140<
78DEFT 137=
79ALT 135>
80GhostBSD 133<
81Solaris 132>
82EasyPeasy 129=
83Yellow Dog 120=
84KANOTIX 120>
85PureOS 119>
86Zentyal 117=
87PC/OS 117=
88Imagineos 116>
89TinyMe 113=
90Porteus 113=
91AUSTRUMI 112=
92Netrunner 111=
93Lunar 110=
94Elive 110=
95MINIX 108=
96Turbolinux 104=
97Novell SLE 103=
98Caixa Mágica 103=
99Connochaet 101=
100Parsix 100=

'리눅스배포판' 카테고리의 다른 글

CentOS 6.0  (0) 2011.07.11
ArtistX - multimedia linux 리뷰  (0) 2011.07.08
Calculate Linux 11.6-beta2  (0) 2011.06.12
Peppermint OS - 페퍼민트OS 리눅스  (0) 2011.06.10
페도라15 - Fedora 15 (lovelock)  (0) 2011.06.09



Description:

Now it's easy to customize your desktop!

Conky is a free, light-weight system monitor for X, that displays any information on your desktop.

CONKY-colors is an easier way to configure Conky. 

This conky script support multilanguage:
Bulgarian, English, German, Italian, Polish, Portuguese, Russian, Spanish and Ukrainian

How to install
Go to a terminal and type:
$sudo apt-get install aptitude python-statgrab ttf-droid hddtemp curl lm-sensors conky-all
$sudo chmod u+s /usr/sbin/hddtemp
$sudo sensors-detect #answering Yes (default) to all questions, even that last one that defaults to No

Now restart your session

Download and extract the conky-colors.tar.gz and type in terminal in the same directory that has been extracted.
$make
$sudo make install
$conky-colors {options}

Ex: if your cpu is quad-core and you want the noble color, with hd, network and pidgin monitor and all in portuguese
conky-colors --theme=gnome-noble --lang=pt --cpu=4 --network --hd=default --pidgin

For a working weather script you NEED to define, in a user specific config file, a partner id and registration code for the weather.com xoap service. For this purpose copy .conkyForecast.config in /usr/share/conkycolors folder to your home and setup as required.

bbcweather widget don't need any kind of registration

For a working photo widget you need to specify a file or directory in conkyPhoto or conkyPhotoRandom script in ~/.conkycolors/bin/

Update your font cache:
$sudo fc-cache -v -f

+++ Kaivalagi's Scripts (Included in conky-colors) +++
Conky Weather Script: http://ubuntuforums.org/showthread.php?t=869328
Conky SSL Mail Script: http://ubuntuforums.org/showthread.php?t=869771
Conky Pidgin Script: http://ubuntuforums.org/showthread.php?t=969933&highlight=pidgin+conky
Conky Rhythmbox Script: http://ubuntuforums.org/showthread.php?t=928168&highlight=conky+rhythmbox
Conky Banshee Script: http://ubuntuforums.org/showthread.php?p=7683570
Conky Exaile Script: http://ubuntuforums.org/showthread.php?t=926041
+++ If you can, say thanks to him for this great work +++

If you choose --todo option, create a file called ToDo.txt in your home and open /usr/share/conkycolors/bin/task file to install this script. This one will help you to easy add and remove tasks

finaly, alt+f2 and type conky.

To run conky at startup, go to System > Preferences > Startup Applications, click "Add" and add the path to the conkyStart file[/usr/share/conkycolors/bin/conkyStart]

that's all folks!

KWON PROBLEMS:
Lua/bash scripts work with conky 1.8.1, but most of the python scripts still doesnt;
Python scripts work with conky 2.0pre, but lua/cairo doesnt :S

HELP WITH CONKY:
http://ubuntuforums.org/showthread.php?t=281865




Changelog:

5.1.2(2011-06-09)
* Fixed bug in conkyClock scripts (Thanks to samsagax)

5.1.1(2011-06-06)
* Added option to create a new task in conkyTask
* Better display of tasks in terminal and conky
* Cosmetic changes in calendar

5.1(2011-06-04)
* Added --task option
* Added conkyTask script, the easier way to manage tasks into your desktop!
Usage: ct [add|done|del|show|list|help]
Options:
list - list all tasks
add - add a new task to the list
done - done the task of the list
del - remove the task from the list
show - show selected task
help - show this help message

* Added --yahooweather option, a simple weather monitor
* Removed --todo option

5.0.3 (2011-06-03)
* Improvements in Board Mode
(you should use this mode with --weather option for a "better" look)

5.0.2 (2011-06-03)
* Fixed bug in all HD scripts with conky >= 1.8.1 (Thanks to samsagax)
* Update Kaivalagi's scripts

5.0.1 (2011-05-26)
* Work with GNOME 3
Lua/bash scripts work with conky 1.8.1, most of the python scripts still doesnt

5.0 (2011-03-30)
New board mode:
--board - Enable board-conky mode
options avaliable with this mode:
--w=(width) - Set width of your screen
--h=(height) - Set height of your screen
--cpu=(number) - Set number of cpu cores [max=2]
Quad-core support (but it only looks good with resolution superior than 1280x800)
--nobg option
--weather=(area_id) option
--unit=(C|F)- Force output temperature either in Celius or Fahrenheit
New ring mode, inspired from conky-gray by hardball
You have to manual edit the /usr/share/conkycolors/scripts/conkyRingCPU2.lua file for dark and white themes (just change the first lines)
* Added --wireless option to the conky-cairo mode
* Added French language (thanks to actarux)
* Updated all Kaivalagi's scripts
* Small changes
* bugfixes


 

+ Recent posts